Many industries worldwide depend on efficiently moving products in warehouses for shipping, storage, or other purposes. Any inefficiency in the process can impact the productivity and outcome of the business, which isn’t acceptable by anyone. Therefore, the Moffett forklift is an important piece of equipment for these industries. To ensure that the machine keeps working efficiently, its part and components must be properly understood.
In this blog post, we have listed down some of the components that anyone who is thinking of buying a forklift should know. So, without any delay, let’s begin.
The frame of Moffett Forklift Truck
The truck frame of a forklift is made using metal. Several parts of the forklifts are attached with the frame, including mast, engine, wheels and axels, overhead guard, and a counterweight. In some truck forklift models, hydraulic fluid or fuel tank is also built within.
Counterweight
The counterweight can be found at the back end of the forklift. This part aims to counterbalance the weight that the forklift will carry. It helps the truck forklift from tipping over. The counterweight is only made to balance the maximum load capacity of the forklift. So, make sure the operator is aware of the equipment’s maximum capacity.
Forklift Mast
This part allows the forklift to perform its main function, i.e., lifting and lowering the load. A mast is a vertical section in the front with interlocking rails powered by hydraulic cylinders. The function of this part is usually divided into stages, duplex, triplex, and quad. The stages reflect the height forklift can raise the load; hence, the quad one will allow you to lift the load to a great height to reach the tallest shelves.
Operator Cab of The Piggyback Truck
The operator cab is where the driver sits to operate the forklift. This part of the equipment consists of a brake, steering wheel, acceleration pedals, levers, dashboards, mast, and a dashboard with gauges. Some forklift equipment has seats, while others are designed for operators to stand. The forklift’s steering system uses a hydraulic cylinder that turns the rear tires while pivoting on the front ones.
The levers included in a piggyback truck forklift are:
- Tilt Lever: adjust the fork’s angle
- Lift Lever: lifts the fork in an upward and downward motion
- Side-Shift Lever: It moves the carriage sideways (horizontally)
Carriage
The carriage is the front part of the mast, including forks and load backrest. The forks will help lift the load from the ground, while the backrest provides the load a platform to rest on and prevent it from slipping towards the operator. Also, it protects mast from the damages.
Forklift Tires
When it comes to Moffett forklift tires, you have some options available. There is an option between three or four-tire options. With the four-tire option, you can lift heavier weights, whereas the three-tire option allows you the flexibility of lifting loads in compact spaces.
If you have operations indoors, look for cushion tires, and for outdoor usage, pick pneumatic tires as they have better traction and handle uneven surfaces. The sellers like Truck Forklifts allow buyers to customize the option based on their requirements.
Power Source
Forklifts can have two main power sources, including internal combustion engines, or if it is an electric one, it could be a motor supported by battery or fuel cells.
If you want a forklift that works on an internal combustion engine, you’ll need LP gas, CNG, or gasoline to power it. The working mechanisms of such engines are the same as the cars and consist of various components like bearings, gears, and chains to keep them properly functioning.
Forklift Attachments
Additional attachments are also available that you can install permanently or temporarily. They allow for extra capabilities and support for heavy and unconventional loads. You can find different attachments: fork positioners, side shifters, pole attachments, rotators, and many more.
All of these Moffett forklift components are important to improve the efficiency of the equipment. The use of high-quality components reduces the risks of forklift failure, helping businesses make their material handling more efficient and effective.
Move on to our next section to get more details about forklift parts and components.
Frequently Asked Questions
- What are the main components of a forklift?
Though all the components are important, the truck body, hydraulic lift, and overhead gear are the three major ones. All of these allow for the effective and safe functioning of the equipment.
- What are the three main guards on a forklift?
The three main guards included in a forklift include:
- Load Backrest: It prevents the load from moving back towards the operator.
- Overhead Guard: Protects the operator if an object falls.
- Foot Guard: Important to protect the operator’s feet from falling objects.
- What equipment do forklift operators use?
The operators control moving levers, foot pedals, and steering wheel on the forklifts. They can also control the forks by turning dials. Other than this, their duties include inspecting the forklift daily, making adjustments, and performing small repairs (if needed).
Also read this My Investment Playbook